Spectrum

SCPI Command :

MEASurement<*>:AMPTime:ARIThmetic:PARameter<*>:SPECtrum
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(measurement=Measurement.Default, measParameter=MeasParameter.Default) → MeasSpectrumParam[source]
# MEASurement<*>:AMPTime:ARIThmetic:PARameter<*>:SPECtrum
value: enums.MeasSpectrumParam = driver.measurement.ampTime.arithmetic.parameter.spectrum.get(measurement = repcap.Measurement.Default, measParameter = repcap.MeasParameter.Default)

Selects the spectrum arithmetics measurements for the measurement group.

Parameters:

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

  • measParameter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Parameter’)

set(arith_op_1_meas_spectrum: MeasSpectrumParam, measurement=Measurement.Default, measParameter=MeasParameter.Default) → None[source]
# MEASurement<*>:AMPTime:ARIThmetic:PARameter<*>:SPECtrum
driver.measurement.ampTime.arithmetic.parameter.spectrum.set(arith_op_1_meas_spectrum = enums.MeasSpectrumParam.ACPower, measurement = repcap.Measurement.Default, measParameter = repcap.MeasParameter.Default)

Selects the spectrum arithmetics measurements for the measurement group.

Parameters:

  • arith_op_1_meas_spectrum – CPOWer | ACPower | OBWidth | SBWidth | TOI | AMMod | THD | THDPCT | THDPct | THDA | THDU | THDR | PLISt | HAR | THDF | SPAR

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

  • measParameter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Parameter’)