Additional

SCPI Command :

MEASurement<*>:ADDitional

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(meas_type: MeasurementType, measurement=Measurement.Default) → bool

# MEASurement<*>:ADDitional
value: bool = driver.measurement.additional.get(meas_type = enums.MeasurementType.ACPower, measurement = repcap.Measurement.Default)

Adds additional measurements to the indicated measurement group. Only one measurement can be enabled or disabled per command. The query returns the state of the specified measurement. Note that each measurement group must contain measurements from the same category. For example, if the main measurement of measurement group 1 is amplitude, then you cannot enable an eye width measurement in the same measurement group.

Parameters:

• meas_type – See method RsRtx.measurement.main.set().

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

Returns:

state: Enables or disables the measurement.

set(meas_type: MeasurementType, state: bool, measurement=Measurement.Default) → None

# MEASurement<*>:ADDitional
driver.measurement.additional.set(meas_type = enums.MeasurementType.ACPower, state = False, measurement = repcap.Measurement.Default)

Adds additional measurements to the indicated measurement group. Only one measurement can be enabled or disabled per command. The query returns the state of the specified measurement. Note that each measurement group must contain measurements from the same category. For example, if the main measurement of measurement group 1 is amplitude, then you cannot enable an eye width measurement in the same measurement group.

Parameters:

• meas_type – See method RsRtx.measurement.main.set().

• state – Enables or disables the measurement.

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)