RefCurve<RefCurve>

SCPI Commands :

REFCurve<*>:CLEar
REFCurve<*>:DELete
REFCurve<*>:OPEN
REFCurve<*>:SAVE

Commands in total: 33
Subgroups: 15
Direct child commands: 4

Repeated Capability Setting:

# Range: Nr1 .. Nr4

driver.refCurve.repcap_refCurve_set(repcap.RefCurve.Nr1)

clear(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None[source]

# REFCurve<*>:CLEar
driver.refCurve.clear(refCurve = repcap.RefCurve.Default)

The selected reference waveform is no longer displayed, its memory is deleted.

Parameters:

refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)
opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.

delete(refCurve=RefCurve.Default) → None[source]

# REFCurve<*>:DELete
driver.refCurve.delete(refCurve = repcap.RefCurve.Default)

Deletes the reference waveform file selected by method RsRtx.refCurve.name.set() .

Parameters:: refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

delete_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None[source]

open(refCurve=RefCurve.Default) → None[source]

# REFCurve<*>:OPEN
driver.refCurve.open(refCurve = repcap.RefCurve.Default)

Loads the reference waveform file selected by method RsRtx.refCurve.name.set() .

Parameters:: refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

open_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None[source]

save(refCurve=RefCurve.Default) → None[source]

# REFCurve<*>:SAVE
driver.refCurve.save(refCurve = repcap.RefCurve.Default)

Saves the reference waveform to the file selected by method RsRtx.refCurve.name.set() .

Parameters:: refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

save_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None[source]

Cloning the Group

# Create a copy of the original group, that exists independently
refCurve_copy = driver.refCurve.clone()

Subgroups