Deembedding<Deembedding>

SCPI Commands :

DEEMbedding<*>:PRESet
DEEMbedding<*>:SAVE
DEEMbedding<*>:OPEN
DEEMbedding<*>:DELete
Commands in total: 38
Subgroups: 10
Direct child commands: 4

Repeated Capability Setting:

# Range: Nr1 .. Nr4

driver.deembedding.repcap_deembedding_set(repcap.Deembedding.Nr1)
delete(deembedding=Deembedding.Default) → None[source]
# DEEMbedding<*>:DELete
driver.deembedding.delete(deembedding = repcap.Deembedding.Default)

Deletes the deembedding configuration file specified with method RsRtx.deembedding.name.set() .

Parameters:

deembedding – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Deembedding’)

delete_and_wait(deembedding=Deembedding.Default, opc_timeout_ms: int = -1) → None[source]
open(deembedding=Deembedding.Default) → None[source]
# DEEMbedding<*>:OPEN
driver.deembedding.open(deembedding = repcap.Deembedding.Default)

Opens and loads the deembedding configuration from the file specified with method RsRtx.deembedding.name.set() .

Parameters:

deembedding – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Deembedding’)

open_and_wait(deembedding=Deembedding.Default, opc_timeout_ms: int = -1) → None[source]
preset(deembedding=Deembedding.Default, opc_timeout_ms: int = -1) → None[source]
# DEEMbedding<*>:PRESet
driver.deembedding.preset(deembedding = repcap.Deembedding.Default)

Sets the complete deembedding configuration to the default values. Use this command always before setting up the deembedding, because *RST does not affect the deembedding settings.

Parameters:

  • deembedding – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Deembedding’)

  • opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.

save(deembedding=Deembedding.Default) → None[source]
# DEEMbedding<*>:SAVE
driver.deembedding.save(deembedding = repcap.Deembedding.Default)

Saves the deembedding configuration to the file specified with method RsRtx.deembedding.name.set() .

Parameters:

deembedding – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Deembedding’)

save_and_wait(deembedding=Deembedding.Default, opc_timeout_ms: int = -1) → None[source]

Cloning the Group

# Create a copy of the original group, that exists independently
deembedding_copy = driver.deembedding.clone()

Subgroups