Position

SCPI Command :

REFCurve<*>:POSition

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refCurve=RefCurve.Default) → float

# REFCurve<*>:POSition
value: float = driver.refCurve.position.get(refCurve = repcap.RefCurve.Default)

Moves the reference waveform and its horizontal axis up or down in the diagram, if vertical scaling is set to Independent (see method RsRtx.refCurve.vmode.set() ) .

Parameters:

refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

Returns:

vert_posi: -100E+24 to 100E+24

set(vert_posi: float, refCurve=RefCurve.Default) → None

# REFCurve<*>:POSition
driver.refCurve.position.set(vert_posi = 1.0, refCurve = repcap.RefCurve.Default)

Moves the reference waveform and its horizontal axis up or down in the diagram, if vertical scaling is set to Independent (see method RsRtx.refCurve.vmode.set() ) .

Parameters:

• vert_posi – -100E+24 to 100E+24

• refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)