Offset

SCPI Command :

REFCurve<*>:RESCale:VERTical:OFFSet

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(refCurve=RefCurve.Default) → float[source]

# REFCurve<*>:RESCale:VERTical:OFFSet
value: float = driver.refCurve.rescale.vertical.offset.get(refCurve = repcap.RefCurve.Default)

Moves the reference waveform vertically. Like vertical offset of channel waveforms, the offset of a reference waveform is subtracted from the measured value.

Parameters:: refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)
Returns:: offset: Negative values shift the waveform up, positive values shift it down.

set(offset: float, refCurve=RefCurve.Default) → None[source]

# REFCurve<*>:RESCale:VERTical:OFFSet
driver.refCurve.rescale.vertical.offset.set(offset = 1.0, refCurve = repcap.RefCurve.Default)

Moves the reference waveform vertically. Like vertical offset of channel waveforms, the offset of a reference waveform is subtracted from the measured value.

Parameters:

offset – Negative values shift the waveform up, positive values shift it down.
refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)