Multiple

SCPI Command :

MEASurement<*>:MULTiple

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default) → bool[source]

# MEASurement<*>:MULTiple
value: bool = driver.measurement.multiple.get(measurement = repcap.Measurement.Default)

The measurement is performed repeatedly if the measured parameter occurs several times inside the acquisition or defined gate.

Parameters:: measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
Returns:: multi_meas: OFF | ON

set(multi_meas: bool, measurement=Measurement.Default) → None[source]

# MEASurement<*>:MULTiple
driver.measurement.multiple.set(multi_meas = False, measurement = repcap.Measurement.Default)

The measurement is performed repeatedly if the measured parameter occurs several times inside the acquisition or defined gate.

Parameters:

multi_meas – OFF | ON
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)