Category

SCPI Command :

MEASurement<*>:CATegory
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(measurement=Measurement.Default) → MeasCategory[source]
# MEASurement<*>:CATegory
value: enums.MeasCategory = driver.measurement.category.get(measurement = repcap.Measurement.Default)

Defines the measurement category.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

Returns:

category: AMPTime | JITTer | EYEJitter | OPTical | SPECtrum | HISTogram | PROTocol | EMC

  • AMPTime: Amplitude and time measurements

  • JITTer: Jitter measurements, available if one of the jitter options is installed.

  • EMC: EMC/ESD test (option R&S RTP-K155)

  • EYEJitter: Eye diagram measurements

  • OPTical: Optical measurements

  • SPECtrum: Spectrum measurements

  • HISTogram: Histogram measurements

  • PROTocol: Protocol measurements

set(category: MeasCategory, measurement=Measurement.Default) → None[source]
# MEASurement<*>:CATegory
driver.measurement.category.set(category = enums.MeasCategory.AMPTime, measurement = repcap.Measurement.Default)

Defines the measurement category.

Parameters:

  • category –

    AMPTime | JITTer | EYEJitter | OPTical | SPECtrum | HISTogram | PROTocol | EMC

    • AMPTime: Amplitude and time measurements

    • JITTer: Jitter measurements, available if one of the jitter options is installed.

    • EMC: EMC/ESD test (option R&S RTP-K155)

    • EYEJitter: Eye diagram measurements

    • OPTical: Optical measurements

    • SPECtrum: Spectrum measurements

    • HISTogram: Histogram measurements

    • PROTocol: Protocol measurements

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)