Source

SCPI Command :

MEASurement<*>:SOURce
Commands in total: 1
Subgroups: 0
Direct child commands: 1
class SourceStruct[source]

Response structure. Fields:

  • 1 Signal_Source: enums.SignalSource: First source of the measurement, see ‘Waveform parameter’

  • 2 Signal_Source_2: enums.SignalSource: Second measurement source. The 2nd source is required for amplitude/time measurements that are performed on two waveforms (e.g. delay, phase) . Digital channels are only available if SignalSource is a digital channel. Step response, advanced jitter track components and synthetic eye sources are available for amplitude/time measurements only.

get(measurement=Measurement.Default) → SourceStruct[source]
# MEASurement<*>:SOURce
value: SourceStruct = driver.measurement.source.get(measurement = repcap.Measurement.Default)

Defines the source of the measurement. Availability of sources depends on the selected category and installed options.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

Returns:

structure: for return value, see the help for SourceStruct structure arguments.

set(signal_source: SignalSource, signal_source_2: SignalSource = None, measurement=Measurement.Default) → None[source]
# MEASurement<*>:SOURce
driver.measurement.source.set(signal_source = enums.SignalSource.AJ1, signal_source_2 = enums.SignalSource.AJ1, measurement = repcap.Measurement.Default)

Defines the source of the measurement. Availability of sources depends on the selected category and installed options.

Parameters:

  • signal_source – First source of the measurement, see ‘Waveform parameter’

  • signal_source_2 – Second measurement source. The 2nd source is required for amplitude/time measurements that are performed on two waveforms (e.g. delay, phase) . Digital channels are only available if SignalSource is a digital channel. Step response, advanced jitter track components and synthetic eye sources are available for amplitude/time measurements only.

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)