AmpTime

SCPI Command :

MEASurement<*>:AMPTime:ARIThmetic:PARameter<*>:AMPTime

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default, measParameter=MeasParameter.Default) → ArithmeticOperation[source]

# MEASurement<*>:AMPTime:ARIThmetic:PARameter<*>:AMPTime
value: enums.ArithmeticOperation = driver.measurement.ampTime.arithmetic.parameter.ampTime.get(measurement = repcap.Measurement.Default, measParameter = repcap.MeasParameter.Default)

Selects the amplitude/time arithmetics measurements for the measurement group.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
measParameter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Parameter’)

set(arith_op_1_meas_amplitude_time: ArithmeticOperation, measurement=Measurement.Default, measParameter=MeasParameter.Default) → None[source]

# MEASurement<*>:AMPTime:ARIThmetic:PARameter<*>:AMPTime
driver.measurement.ampTime.arithmetic.parameter.ampTime.set(arith_op_1_meas_amplitude_time = enums.ArithmeticOperation.AMPLitude, measurement = repcap.Measurement.Default, measParameter = repcap.MeasParameter.Default)

Selects the amplitude/time arithmetics measurements for the measurement group.

Parameters:

arith_op_1_meas_amplitude_time – See Table ‘Amplitude and time measurements’.
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
measParameter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Parameter’)