PrLevel

SCPI Command :

MEASurement<*>:AMPTime:PRLevel

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default) → float[source]

# MEASurement<*>:AMPTime:PRLevel
value: float = driver.measurement.ampTime.prLevel.get(measurement = repcap.Measurement.Default)

Available only if method RsRtx.measurement.ampTime.prlMode.set() is set to USER. Sets the reference level for the positive and negative pulse measurements for the user defined reference level.

Parameters:: measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
Returns:: pls_ref_lev_manual: -100E+24 to 100E+24

set(pls_ref_lev_manual: float, measurement=Measurement.Default) → None[source]

# MEASurement<*>:AMPTime:PRLevel
driver.measurement.ampTime.prLevel.set(pls_ref_lev_manual = 1.0, measurement = repcap.Measurement.Default)

Available only if method RsRtx.measurement.ampTime.prlMode.set() is set to USER. Sets the reference level for the positive and negative pulse measurements for the user defined reference level.

Parameters:

pls_ref_lev_manual – -100E+24 to 100E+24
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)