PrlMode

SCPI Command :

MEASurement<*>:AMPTime:PRLMode
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(measurement=Measurement.Default) → ReferenceLevelMode[source]
# MEASurement<*>:AMPTime:PRLMode
value: enums.ReferenceLevelMode = driver.measurement.ampTime.prlMode.get(measurement = repcap.Measurement.Default)

Selects the reference level of the measurement source on which the pulse is measured: upper, middle, lower level or user defined level. This command is relevant for the positive and negative pulse measurements.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

Returns:

pls_ref_lev_md: UPPer | MIDDle | LOWer | USER

set(pls_ref_lev_md: ReferenceLevelMode, measurement=Measurement.Default) → None[source]
# MEASurement<*>:AMPTime:PRLMode
driver.measurement.ampTime.prlMode.set(pls_ref_lev_md = enums.ReferenceLevelMode.LOWer, measurement = repcap.Measurement.Default)

Selects the reference level of the measurement source on which the pulse is measured: upper, middle, lower level or user defined level. This command is relevant for the positive and negative pulse measurements.

Parameters:

  • pls_ref_lev_md – UPPer | MIDDle | LOWer | USER

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)