Lselect

SCPI Command :

MEASurement<*>:AMPTime:DTOTrigger<*>:LSELect
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(measurement=Measurement.Default, dtoTrigger=DtoTrigger.Default) → ReferenceLevelMode[source]
# MEASurement<*>:AMPTime:DTOTrigger<*>:LSELect
value: enums.ReferenceLevelMode = driver.measurement.ampTime.dtoTrigger.lselect.get(measurement = repcap.Measurement.Default, dtoTrigger = repcap.DtoTrigger.Default)

Selects the reference level of the measurement source on which the delay is measured.

Parameters:

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

  • dtoTrigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘DtoTrigger’)

set(dly_trig_lev_sel: ReferenceLevelMode, measurement=Measurement.Default, dtoTrigger=DtoTrigger.Default) → None[source]
# MEASurement<*>:AMPTime:DTOTrigger<*>:LSELect
driver.measurement.ampTime.dtoTrigger.lselect.set(dly_trig_lev_sel = enums.ReferenceLevelMode.LOWer, measurement = repcap.Measurement.Default, dtoTrigger = repcap.DtoTrigger.Default)

Selects the reference level of the measurement source on which the delay is measured.

Parameters:

  • dly_trig_lev_sel – UPPer | MIDDle | LOWer

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

  • dtoTrigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘DtoTrigger’)