Frequency

SCPI Command :

MEASurement<*>:JITTer:CLOCk:FREQuency

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(measurement=Measurement.Default) → float

# MEASurement<*>:JITTer:CLOCk:FREQuency
value: float = driver.measurement.jitter.clock.frequency.get(measurement = repcap.Measurement.Default)

Sets the clock frequency for the explicit clock signal. The setting is relevant if the clock is an explicit clock signal and the data signal has a PAM order > 2.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

set(clock_frequency: float, measurement=Measurement.Default) → None

# MEASurement<*>:JITTer:CLOCk:FREQuency
driver.measurement.jitter.clock.frequency.set(clock_frequency = 1.0, measurement = repcap.Measurement.Default)

Sets the clock frequency for the explicit clock signal. The setting is relevant if the clock is an explicit clock signal and the data signal has a PAM order > 2.

Parameters:

• clock_frequency – 1000 to 10E+9

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)