Factor

SCPI Command :

MEASurement<*>:JITTer:CLOCk:FACTor

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(measurement=Measurement.Default) → int

# MEASurement<*>:JITTer:CLOCk:FACTor
value: int = driver.measurement.jitter.clock.factor.get(measurement = repcap.Measurement.Default)

Sets a value for the clock multiplier, the number of samples per clock interval. The setting is relevant if the clock is an explicit clock signal.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

set(ref_clk_multiplicator: int, measurement=Measurement.Default) → None

# MEASurement<*>:JITTer:CLOCk:FACTor
driver.measurement.jitter.clock.factor.set(ref_clk_multiplicator = 1, measurement = repcap.Measurement.Default)

Sets a value for the clock multiplier, the number of samples per clock interval. The setting is relevant if the clock is an explicit clock signal.

Parameters:

• ref_clk_multiplicator – 1 to 100

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)