SkwRelation

SCPI Command :

MEASurement<*>:JITTer:SKWRelation

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(measurement=Measurement.Default) → MeasJitterSkewRel

# MEASurement<*>:JITTer:SKWRelation
value: enums.MeasJitterSkewRel = driver.measurement.jitter.skwRelation.get(measurement = repcap.Measurement.Default)

Sets the edge of the second waveform relative to the first waveform. The command is available for the following measurements: skew delay and skew phase (method RsRtx.measurement.main.set() and/or method RsRtx.measurement.additional.set() are set to measurements SKWDelay | SKWPhase) .

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

set(jitter_skw_relt: MeasJitterSkewRel, measurement=Measurement.Default) → None

# MEASurement<*>:JITTer:SKWRelation
driver.measurement.jitter.skwRelation.set(jitter_skw_relt = enums.MeasJitterSkewRel.INVerse, measurement = repcap.Measurement.Default)

Sets the edge of the second waveform relative to the first waveform. The command is available for the following measurements: skew delay and skew phase (method RsRtx.measurement.main.set() and/or method RsRtx.measurement.additional.set() are set to measurements SKWDelay | SKWPhase) .

Parameters:

• jitter_skw_relt –

  MATChing | INVerse

  • MATChing: Measures from positive to positive edge or from negative to negative edge.

  • INVerse: Measures from positive to negative edge or from negative to positive edge.

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)