Mode

SCPI Command :

MEASurement<*>:SPECtrum:RESult<*>:MODE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(measurement=Measurement.Default, measResult=MeasResult.Default) → PositionMode

# MEASurement<*>:SPECtrum:RESult<*>:MODE
value: enums.PositionMode = driver.measurement.spectrum.result.mode.get(measurement = repcap.Measurement.Default, measResult = repcap.MeasResult.Default)

Sets the way how the measurement results are displayed. Available only if method RsRtx.measurement.main.set() is set to PLISt or HAR.

Parameters:

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

• measResult – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Result’)

Returns:

result_mode: ABS | REL

• ABS: The harmonics/peaks are shown in absolute value, dBm.

• REL: The level of the carrier is shown in absolute value dBm. The values the harmonics/peaks are shown relatively to the carrier in dBc.

set(result_mode: PositionMode, measurement=Measurement.Default, measResult=MeasResult.Default) → None

# MEASurement<*>:SPECtrum:RESult<*>:MODE
driver.measurement.spectrum.result.mode.set(result_mode = enums.PositionMode.ABS, measurement = repcap.Measurement.Default, measResult = repcap.MeasResult.Default)

Sets the way how the measurement results are displayed. Available only if method RsRtx.measurement.main.set() is set to PLISt or HAR.

Parameters:

• result_mode –

  ABS | REL

  • ABS: The harmonics/peaks are shown in absolute value, dBm.

  • REL: The level of the carrier is shown in absolute value dBm. The values the harmonics/peaks are shown relatively to the carrier in dBc.

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

• measResult – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Result’)