Limit

SCPI Command :

MEASurement<*>:SPECtrum:LCHeck<*>:LOWer:LIMit

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default, limitCheck=LimitCheck.Default) → float[source]

# MEASurement<*>:SPECtrum:LCHeck<*>:LOWer:LIMit
value: float = driver.measurement.spectrum.lcheck.lower.limit.get(measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Define the lower and upper limits for the limit check, respectively. The valid range is defined using the method RsRtx.measurement.spectrum.lcheck.valid.set() command.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)

set(lower_limit: float, measurement=Measurement.Default, limitCheck=LimitCheck.Default) → None[source]

# MEASurement<*>:SPECtrum:LCHeck<*>:LOWer:LIMit
driver.measurement.spectrum.lcheck.lower.limit.set(lower_limit = 1.0, measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Define the lower and upper limits for the limit check, respectively. The valid range is defined using the method RsRtx.measurement.spectrum.lcheck.valid.set() command.

Parameters:

lower_limit – -100 to 100
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)