Valid

SCPI Command :

MEASurement<*>:SPECtrum:LCHeck<*>:VALid

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(measurement=Measurement.Default, limitCheck=LimitCheck.Default) → MeasValidRange

# MEASurement<*>:SPECtrum:LCHeck<*>:VALid
value: enums.MeasValidRange = driver.measurement.spectrum.lcheck.valid.get(measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Enables or disables limit checking for spectrum measurements in the specified measurement channel.

Parameters:

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

• limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)

Returns:

valid_range: ILIMit | ULIMit | LLIMit | OLIMit

• ILIMit: Inside (within) limit; between the upper and lower limit values

• ULIMit: Upper limit; above the upper limit value

• LLIMit: Lower limit; below the lower limit value

• OLIMit: Outside limit; above the upper limit or below the lower limit values

set(valid_range: MeasValidRange, measurement=Measurement.Default, limitCheck=LimitCheck.Default) → None

# MEASurement<*>:SPECtrum:LCHeck<*>:VALid
driver.measurement.spectrum.lcheck.valid.set(valid_range = enums.MeasValidRange.ILIMit, measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Enables or disables limit checking for spectrum measurements in the specified measurement channel.

Parameters:

• valid_range –

  ILIMit | ULIMit | LLIMit | OLIMit

  • ILIMit: Inside (within) limit; between the upper and lower limit values

  • ULIMit: Upper limit; above the upper limit value

  • LLIMit: Lower limit; below the lower limit value

  • OLIMit: Outside limit; above the upper limit or below the lower limit values

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

• limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)