Start

SCPI Command :

MEASurement<*>:RESult:STARt
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(meas_type: MeasurementType = None, base_level: float = None, target_level: float = None, measurement=Measurement.Default) → float[source]
# MEASurement<*>:RESult:STARt
value: float = driver.measurement.result.start.get(meas_type = enums.MeasurementType.ACPower, base_level = 1.0, target_level = 1.0, measurement = repcap.Measurement.Default)

Return the start and stop times of the specified measurement. The parameter defines the measurement. If no parameter is specified, the result of the main measurement is returned. The main measurement is defined using method RsRtx.measurement.main.set() .

Parameters:

  • meas_type – See method RsRtx.measurement.main.set().

  • base_level – Sets the base level for signals with PAM order 2

  • target_level – Sets the target level for signals with PAM order 2

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)