Selection

SCPI Command :

MEASurement<*>:EMC:LIMit:SELection
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(measurement=Measurement.Default) → EmcLimitsStandard[source]
# MEASurement<*>:EMC:LIMit:SELection
value: enums.EmcLimitsStandard = driver.measurement.emc.limit.selection.get(measurement = repcap.Measurement.Default)

Selects the electrostatic discharge (ESD) immunity test levels according to the guidelines of the EN IEC 61000-4-2:2025 standard. For contact discharge (CD) and air discharge (AD) , it specifies the maximum voltage (kV) .

  • CD1: Contact discharge, 2 kV.

  • CD2: Contact discharge, 4 kV.

  • CD3: Contact discharge, 6 kV.

  • CD4: Contact discharge, 8 kV.

  • AD1: Air discharge, 2 kV.

  • AD2: Air discharge, 4 kV.

  • AD3: Air discharge, 8 kV.

  • AD4: Air discharge, 15 kV.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

Returns:

limits_standard: CD1 | CD2 | CD3 | CD4 | AD1 | AD2 | AD3 | AD4

set(limits_standard: EmcLimitsStandard, measurement=Measurement.Default) → None[source]
# MEASurement<*>:EMC:LIMit:SELection
driver.measurement.emc.limit.selection.set(limits_standard = enums.EmcLimitsStandard.AD1, measurement = repcap.Measurement.Default)

Selects the electrostatic discharge (ESD) immunity test levels according to the guidelines of the EN IEC 61000-4-2:2025 standard. For contact discharge (CD) and air discharge (AD) , it specifies the maximum voltage (kV) .

  • CD1: Contact discharge, 2 kV.

  • CD2: Contact discharge, 4 kV.

  • CD3: Contact discharge, 6 kV.

  • CD4: Contact discharge, 8 kV.

  • AD1: Air discharge, 2 kV.

  • AD2: Air discharge, 4 kV.

  • AD3: Air discharge, 8 kV.

  • AD4: Air discharge, 15 kV.

Parameters:

  • limits_standard – CD1 | CD2 | CD3 | CD4 | AD1 | AD2 | AD3 | AD4

  • measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)