BottomInner

SCPI Command :

MEASurement<*>:REFLevel:RESult:BINNer

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default) → float[source]

# MEASurement<*>:REFLevel:RESult:BINNer
value: float = driver.measurement.refLevel.result.bottomInner.get(measurement = repcap.Measurement.Default)

Returns the area above the low signal level which is still considered to be low level.

Parameters:: measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
Returns:: bottom_inner: -100E+24 to 100E+24