Margin

SCPI Command :

MEASurement<*>:OPTical:LCHeck<*>:UPPer:MARGin

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default, limitCheck=LimitCheck.Default) → float[source]

# MEASurement<*>:OPTical:LCHeck<*>:UPPer:MARGin
value: float = driver.measurement.optical.lcheck.upper.margin.get(measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Define the lower/ upper margin for limit checking of the optical measurements. The range is defined with method RsRtx.measurement.optical.lcheck.valid.set() .

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)

Returns:

upper_margin: -100 to 100

set(upper_margin: float, measurement=Measurement.Default, limitCheck=LimitCheck.Default) → None[source]

# MEASurement<*>:OPTical:LCHeck<*>:UPPer:MARGin
driver.measurement.optical.lcheck.upper.margin.set(upper_margin = 1.0, measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Define the lower/ upper margin for limit checking of the optical measurements. The range is defined with method RsRtx.measurement.optical.lcheck.valid.set() .

Parameters:

upper_margin – -100 to 100
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)