Limit

SCPI Command :

MEASurement<*>:OPTical:LCHeck<*>:LOWer:LIMit

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default, limitCheck=LimitCheck.Default) → float[source]

# MEASurement<*>:OPTical:LCHeck<*>:LOWer:LIMit
value: float = driver.measurement.optical.lcheck.lower.limit.get(measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Define the lower/ upper limit for limit checking of the optical measurements. The range is defined with method RsRtx.measurement.optical.lcheck.valid.set() .

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)

set(lower_limit: float, measurement=Measurement.Default, limitCheck=LimitCheck.Default) → None[source]

# MEASurement<*>:OPTical:LCHeck<*>:LOWer:LIMit
driver.measurement.optical.lcheck.lower.limit.set(lower_limit = 1.0, measurement = repcap.Measurement.Default, limitCheck = repcap.LimitCheck.Default)

Define the lower/ upper limit for limit checking of the optical measurements. The range is defined with method RsRtx.measurement.optical.lcheck.valid.set() .

Parameters:

lower_limit – -100 to 100
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
limitCheck – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Lcheck’)