Stop

SCPI Command :

MEASurement<*>:GATE:ABSolute:STOP

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default) → float[source]

# MEASurement<*>:GATE:ABSolute:STOP
value: float = driver.measurement.gate.absolute.stop.get(measurement = repcap.Measurement.Default)

Define the absolute start and end values for the gate.

Parameters:: measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)
Returns:: stop: -100E+24 to 100E+24

set(stop: float, measurement=Measurement.Default) → None[source]

# MEASurement<*>:GATE:ABSolute:STOP
driver.measurement.gate.absolute.stop.set(stop = 1.0, measurement = repcap.Measurement.Default)

Define the absolute start and end values for the gate.

Parameters:

stop – -100E+24 to 100E+24
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)