Start

SCPI Command :

MEASurement<*>:EYEJitter:GENSettings:ABSolute:STARt

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(measurement=Measurement.Default) → float

# MEASurement<*>:EYEJitter:GENSettings:ABSolute:STARt
value: float = driver.measurement.eyeJitter.genSettings.absolute.start.get(measurement = repcap.Measurement.Default)

Defines the start of the measurement window in absolute values. This settings is relevant, if method RsRtx.measurement.main.set() is set to one of the following: ERPercent, ERDB, EHEight, QFACtor, RMSNoise, SNRatio, EAMPlitude.

Parameters:

measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

set(abs_time_strt_lev_meas_wind: float, measurement=Measurement.Default) → None

# MEASurement<*>:EYEJitter:GENSettings:ABSolute:STARt
driver.measurement.eyeJitter.genSettings.absolute.start.set(abs_time_strt_lev_meas_wind = 1.0, measurement = repcap.Measurement.Default)

Defines the start of the measurement window in absolute values. This settings is relevant, if method RsRtx.measurement.main.set() is set to one of the following: ERPercent, ERDB, EHEight, QFACtor, RMSNoise, SNRatio, EAMPlitude.

Parameters:

• abs_time_strt_lev_meas_wind – -100E+24 to 100E+24

• measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)