MeasWindow

SCPI Command :

MEASurement<*>:EYEJitter:EYEWidth:MEASwindow

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(measurement=Measurement.Default) → bool[source]

# MEASurement<*>:EYEJitter:EYEWidth:MEASwindow
value: bool = driver.measurement.eyeJitter.eyeWidth.measWindow.get(measurement = repcap.Measurement.Default)

If enabled, you can define a user defined start and stop values for the eye width measurement.

Parameters:: measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

set(use_meas_wind_eye_wdt: bool, measurement=Measurement.Default) → None[source]

# MEASurement<*>:EYEJitter:EYEWidth:MEASwindow
driver.measurement.eyeJitter.eyeWidth.measWindow.set(use_meas_wind_eye_wdt = False, measurement = repcap.Measurement.Default)

If enabled, you can define a user defined start and stop values for the eye width measurement.

Parameters:

use_meas_wind_eye_wdt – OFF | ON
measurement – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)