Upper

SCPI Command :

REFLevel<*>:RELative:UPPer

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(refLevel=RefLevel.Default) → float[source]

# REFLevel<*>:RELative:UPPer
value: float = driver.refLevel.relative.upper.get(refLevel = repcap.RefLevel.Default)

Sets the upper relative reference level if method RsRtx.refLevel.relative.mode.set() is set to USER.

Parameters:: refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)
Returns:: value: Percentage of the high signal level.

set(value: float, refLevel=RefLevel.Default) → None[source]

# REFLevel<*>:RELative:UPPer
driver.refLevel.relative.upper.set(value = 1.0, refLevel = repcap.RefLevel.Default)

Sets the upper relative reference level if method RsRtx.refLevel.relative.mode.set() is set to USER.

Parameters:

value – Percentage of the high signal level.
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)