Otube

SCPI Command :

REFLevel<*>:RELative:OTUBe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refLevel=RefLevel.Default) → float

# REFLevel<*>:RELative:OTUBe
value: float = driver.refLevel.relative.otube.get(refLevel = repcap.RefLevel.Default)

Defines a percentage of the signal level by which the absolute signal level may be larger than the high signal level or lower than the low signal level to be considered high or low, respectively.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

set(value: float, refLevel=RefLevel.Default) → None

# REFLevel<*>:RELative:OTUBe
driver.refLevel.relative.otube.set(value = 1.0, refLevel = repcap.RefLevel.Default)

Defines a percentage of the signal level by which the absolute signal level may be larger than the high signal level or lower than the low signal level to be considered high or low, respectively.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)