Itube

SCPI Command :

REFLevel<*>:RELative:ITUBe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refLevel=RefLevel.Default) → float

# REFLevel<*>:RELative:ITUBe
value: float = driver.refLevel.relative.itube.get(refLevel = repcap.RefLevel.Default)

Defines a percentage of the signal level by which the absolute signal level may be higher than the low signal level or lower than the high signal level to be considered low or high, respectively.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

set(value: float, refLevel=RefLevel.Default) → None

# REFLevel<*>:RELative:ITUBe
driver.refLevel.relative.itube.set(value = 1.0, refLevel = repcap.RefLevel.Default)

Defines a percentage of the signal level by which the absolute signal level may be higher than the low signal level or lower than the high signal level to be considered low or high, respectively.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)