Hysteresis

SCPI Command :

REFLevel<*>:RELative:HYSTeresis

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refLevel=RefLevel.Default) → float

# REFLevel<*>:RELative:HYSTeresis
value: float = driver.refLevel.relative.hysteresis.get(refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

set(value: float, refLevel=RefLevel.Default) → None

# REFLevel<*>:RELative:HYSTeresis
driver.refLevel.relative.hysteresis.set(value = 1.0, refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)