UsrLevel

SCPI Command :

REFLevel<*>:USRLevel
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(refLevel=RefLevel.Default) → RefLevelUserLevel[source]
# REFLevel<*>:USRLevel
value: enums.RefLevelUserLevel = driver.refLevel.usrLevel.get(refLevel = repcap.RefLevel.Default)

Defines whether the user-defined signal levels or user-defined reference levels are used for the measurements.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

mode: USIGnal | UREF

  • USIGnal: The high and low signal levels are defined by the user.

  • UREF: The reference levels are defined by the user.

set(mode: RefLevelUserLevel, refLevel=RefLevel.Default) → None[source]
# REFLevel<*>:USRLevel
driver.refLevel.usrLevel.set(mode = enums.RefLevelUserLevel.UREF, refLevel = repcap.RefLevel.Default)

Defines whether the user-defined signal levels or user-defined reference levels are used for the measurements.

Parameters:

  • mode –

    USIGnal | UREF

    • USIGnal: The high and low signal levels are defined by the user.

    • UREF: The reference levels are defined by the user.

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)