Dmin

SCPI Command :

TRIGger<*>:I2C:DMIN

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → int

# TRIGger<*>:I2C:DMIN
value: int = driver.trigger.i2C.dmin.get(trigger = repcap.Trigger.Default)

Specifies the data bit pattern, or sets the start value of a data pattern range.. Enter the bytes in msb first bit order. The maximum pattern length is 64 bit. Waveform data is compared with the pattern byte-by-byte.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

data: Numeric or string pattern, see ‘Bit pattern parameter’. The string parameter accepts the bit value X (don’t care) .

set(data: int, trigger=Trigger.Default) → None

# TRIGger<*>:I2C:DMIN
driver.trigger.i2C.dmin.set(data = 1, trigger = repcap.Trigger.Default)

Specifies the data bit pattern, or sets the start value of a data pattern range.. Enter the bytes in msb first bit order. The maximum pattern length is 64 bit. Waveform data is compared with the pattern byte-by-byte.

Parameters:

• data – Numeric or string pattern, see ‘Bit pattern parameter’. The string parameter accepts the bit value X (don’t care) .

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)