Coupling

SCPI Command :

TRIGger<*>:COUPling

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → TriggerCoupling

# TRIGger<*>:COUPling
value: enums.TriggerCoupling = driver.trigger.coupling.get(trigger = repcap.Trigger.Default)

Selects the filter for the trigger channel(s) . Other channels must use the same filter, or proceed unfiltered.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

dig_trig_cpl: OFF | RFReject

• OFF: The trigger signal is not filtered.

• RFReject: Frequencies higher a given limit are rejected, lower frequencies pass the filter. The limit is set with TRIGgert:RFReject.

set(dig_trig_cpl: TriggerCoupling, trigger=Trigger.Default) → None

# TRIGger<*>:COUPling
driver.trigger.coupling.set(dig_trig_cpl = enums.TriggerCoupling.LFReject, trigger = repcap.Trigger.Default)

Selects the filter for the trigger channel(s) . Other channels must use the same filter, or proceed unfiltered.

Parameters:

• dig_trig_cpl –

  OFF | RFReject

  • OFF: The trigger signal is not filtered.

  • RFReject: Frequencies higher a given limit are rejected, lower frequencies pass the filter. The limit is set with TRIGgert:RFReject.

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)