Address

SCPI Command :

TRIGger<*>:I2C:ADDRess

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → int

# TRIGger<*>:I2C:ADDRess
value: int = driver.trigger.i2C.address.get(trigger = repcap.Trigger.Default)

Triggers on the specified slave address, or sets the start value of an address range depending on the condition set with method RsRtx.trigger.i2C.acondition.set() .

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

address: Numeric or string pattern, see ‘Bit pattern parameter’.

set(address: int, trigger=Trigger.Default) → None

# TRIGger<*>:I2C:ADDRess
driver.trigger.i2C.address.set(address = 1, trigger = repcap.Trigger.Default)

Triggers on the specified slave address, or sets the start value of an address range depending on the condition set with method RsRtx.trigger.i2C.acondition.set() .

Parameters:

• address – Numeric or string pattern, see ‘Bit pattern parameter’.

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)