Dmax

SCPI Command :

TRIGger<*>:CAN:SYMBolic:DMAX

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → float

# TRIGger<*>:CAN:SYMBolic:DMAX
value: float = driver.trigger.can.symbolic.dmax.get(trigger = repcap.Trigger.Default)

Defines the maximum data value of the signal. This value is required to specify a range if condition INRange | OORange is set with method RsRtx.trigger.can.dcondition.set() .

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

set(symb_max_sign_val: float, trigger=Trigger.Default) → None

# TRIGger<*>:CAN:SYMBolic:DMAX
driver.trigger.can.symbolic.dmax.set(symb_max_sign_val = 1.0, trigger = repcap.Trigger.Default)

Defines the maximum data value of the signal. This value is required to specify a range if condition INRange | OORange is set with method RsRtx.trigger.can.dcondition.set() .

Parameters:

• symb_max_sign_val – Decimal representation of the data pattern

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)