Ftype

SCPI Command :

TRIGger<*>:CAN:FTYPe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → CanRemFrmTyp

# TRIGger<*>:CAN:FTYPe
value: enums.CanRemFrmTyp = driver.trigger.can.ftype.get(trigger = repcap.Trigger.Default)

Selects the CAN frame type if method RsRtx.trigger.can.typePy.set() is set to FTYP (frame type) or ID (identifier) . For data and remote frames, the identifier format has to be set with method RsRtx.trigger.can.itype.set() . See also: ‘Frame type’

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

set(rem_frm_typ: CanRemFrmTyp, trigger=Trigger.Default) → None

# TRIGger<*>:CAN:FTYPe
driver.trigger.can.ftype.set(rem_frm_typ = enums.CanRemFrmTyp.ANY, trigger = repcap.Trigger.Default)

Selects the CAN frame type if method RsRtx.trigger.can.typePy.set() is set to FTYP (frame type) or ID (identifier) . For data and remote frames, the identifier format has to be set with method RsRtx.trigger.can.itype.set() . See also: ‘Frame type’

Parameters:

• rem_frm_typ – Available values depend on the CAN standard and on the method RsRtx.trigger.can.typePy.set() setting: Remote frames are not available in the CAN FD protocol. If the trigger type is set to FTYP (frame type) , you can set the values DATA | REMote | ERRor | OVERload. If the trigger type is set to ID (identifier) , you can set the values ANY | DATA | REMote.

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)