DlcCondition

SCPI Command :

TRIGger<*>:CAN:DLCCondition

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → ConditionOperator

# TRIGger<*>:CAN:DLCCondition
value: enums.ConditionOperator = driver.trigger.can.dlcCondition.get(trigger = repcap.Trigger.Default)

Operator to set the data length code for triggering on CAN and CAN FD data. For details, see ‘Data setup: DLC, NDB, Transfer, Condition, Data min, Data max’. The number of data bytes to be found is set with method RsRtx.trigger.can.dlc.set() . See also: method RsRtx.trigger.can.border.set() .

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

dlc_operator: For little endian transfer direction, EQUal must be set.

set(dlc_operator: ConditionOperator, trigger=Trigger.Default) → None

# TRIGger<*>:CAN:DLCCondition
driver.trigger.can.dlcCondition.set(dlc_operator = enums.ConditionOperator.EQUal, trigger = repcap.Trigger.Default)

Operator to set the data length code for triggering on CAN and CAN FD data. For details, see ‘Data setup: DLC, NDB, Transfer, Condition, Data min, Data max’. The number of data bytes to be found is set with method RsRtx.trigger.can.dlc.set() . See also: method RsRtx.trigger.can.border.set() .

Parameters:

• dlc_operator – For little endian transfer direction, EQUal must be set.

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)