AbsLower

SCPI Command :

REFLevel<*>:PAMReference:LVLJumphgt<*>:THReshold<*>:ABSLower
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(refLevel=RefLevel.Default, refLevelLvlJump=RefLevelLvlJump.Default, refLevelThreshold=RefLevelThreshold.Default) → float[source]
# REFLevel<*>:PAMReference:LVLJumphgt<*>:THReshold<*>:ABSLower
value: float = driver.refLevel.pamReference.lvlJumpHeight.threshold.absLower.get(refLevel = repcap.RefLevel.Default, refLevelLvlJump = repcap.RefLevelLvlJump.Default, refLevelThreshold = repcap.RefLevelThreshold.Default)

Sets the lower absolute reference level if method RsRtx.refLevel.pamReference.lvlDef.set() is set to ABS.

Parameters:

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

  • refLevelLvlJump – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘LvlJumpHeight’)

  • refLevelThreshold – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Threshold’)

set(abs_low_ref_lev: float, refLevel=RefLevel.Default, refLevelLvlJump=RefLevelLvlJump.Default, refLevelThreshold=RefLevelThreshold.Default) → None[source]
# REFLevel<*>:PAMReference:LVLJumphgt<*>:THReshold<*>:ABSLower
driver.refLevel.pamReference.lvlJumpHeight.threshold.absLower.set(abs_low_ref_lev = 1.0, refLevel = repcap.RefLevel.Default, refLevelLvlJump = repcap.RefLevelLvlJump.Default, refLevelThreshold = repcap.RefLevelThreshold.Default)

Sets the lower absolute reference level if method RsRtx.refLevel.pamReference.lvlDef.set() is set to ABS.

Parameters:

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

  • refLevelLvlJump – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘LvlJumpHeight’)

  • refLevelThreshold – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Threshold’)