RelLevel

SCPI Command :

REFLevel<*>:PAMReference:RELLevel

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refLevel=RefLevel.Default) → RefLevelRelativeMode

# REFLevel<*>:PAMReference:RELLevel
value: enums.RefLevelRelativeMode = driver.refLevel.pamReference.relLevel.get(refLevel = repcap.RefLevel.Default)

The lower, middle and upper reference levels, defined as percentages of the high signal level.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

default_rel_levs: FIVE | TEN | TWENty | USER

• FIVE: 5/50/95

• TEN: 10/50/90

• TWENty: 20/50/80

• USER: Set the reference levels to individual values with REFLevelrl:PAMReference:LOWer, REFLevelrl:PAMReference:MIDDle, and REFLevelrl:PAMReference:UPPer.

set(default_rel_levs: RefLevelRelativeMode, refLevel=RefLevel.Default) → None

# REFLevel<*>:PAMReference:RELLevel
driver.refLevel.pamReference.relLevel.set(default_rel_levs = enums.RefLevelRelativeMode.FIVE, refLevel = repcap.RefLevel.Default)

The lower, middle and upper reference levels, defined as percentages of the high signal level.

Parameters:

• default_rel_levs –

  FIVE | TEN | TWENty | USER

  • FIVE: 5/50/95

  • TEN: 10/50/90

  • TWENty: 20/50/80

  • USER: Set the reference levels to individual values with REFLevelrl:PAMReference:LOWer, REFLevelrl:PAMReference:MIDDle, and REFLevelrl:PAMReference:UPPer.

• refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)