Upper

SCPI Command :

REFLevel<*>:PAMReference:UPPer

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(refLevel=RefLevel.Default) → float[source]

# REFLevel<*>:PAMReference:UPPer
value: float = driver.refLevel.pamReference.upper.get(refLevel = repcap.RefLevel.Default)

Sets the upper relative reference level if method RsRtx.refLevel.pamReference.relLevel.set() is set to USER.

Parameters:: refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)
Returns:: default_upp_ref_lev: 0 to 100

set(default_upp_ref_lev: float, refLevel=RefLevel.Default) → None[source]

# REFLevel<*>:PAMReference:UPPer
driver.refLevel.pamReference.upper.set(default_upp_ref_lev = 1.0, refLevel = repcap.RefLevel.Default)

Sets the upper relative reference level if method RsRtx.refLevel.pamReference.relLevel.set() is set to USER.

Parameters:

default_upp_ref_lev – 0 to 100
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)