High

SCPI Command :

WGENerator<*>:VOLTage:HIGH

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(wgenerator=Wgenerator.Default) → float[source]

# WGENerator<*>:VOLTage:HIGH
value: float = driver.wgenerator.voltage.high.get(wgenerator = repcap.Wgenerator.Default)

Sets the high signal level of the output waveform.

Parameters:: wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)
Returns:: high: -5.99 to 6

set(high: float, wgenerator=Wgenerator.Default) → None[source]

# WGENerator<*>:VOLTage:HIGH
driver.wgenerator.voltage.high.set(high = 1.0, wgenerator = repcap.Wgenerator.Default)

Sets the high signal level of the output waveform.

Parameters:

high – -5.99 to 6
wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)