Frequency

SCPI Command :

WGENerator<*>:FREQuency

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(wgenerator=Wgenerator.Default) → float

# WGENerator<*>:FREQuency
value: float = driver.wgenerator.frequency.get(wgenerator = repcap.Wgenerator.Default)

Sets the frequency of the waveform. The available frequency range depends on the selected function type, see Table ‘Frequency range of the function generator waveforms’.

Parameters:

wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)

Returns:

frequency: 1E-3 to 100E+6

set(frequency: float, wgenerator=Wgenerator.Default) → None

# WGENerator<*>:FREQuency
driver.wgenerator.frequency.set(frequency = 1.0, wgenerator = repcap.Wgenerator.Default)

Sets the frequency of the waveform. The available frequency range depends on the selected function type, see Table ‘Frequency range of the function generator waveforms’.

Parameters:

• frequency – 1E-3 to 100E+6

• wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)