Period

SCPI Command :

WGENerator<*>:PERiod

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(wgenerator=Wgenerator.Default) → float[source]

# WGENerator<*>:PERiod
value: float = driver.wgenerator.period.get(wgenerator = repcap.Wgenerator.Default)

Sets the period of the waveform. The available period range depends on the selected function type.

Parameters:: wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)
Returns:: period: 8E-9 to 1000

set(period: float, wgenerator=Wgenerator.Default) → None[source]

# WGENerator<*>:PERiod
driver.wgenerator.period.set(period = 1.0, wgenerator = repcap.Wgenerator.Default)

Sets the period of the waveform. The available period range depends on the selected function type.

Parameters:

period – 8E-9 to 1000
wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)