Dcycle

SCPI Command :

WGENerator<*>:FUNCtion[:SQUare]:DCYCle

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(wgenerator=Wgenerator.Default) → float[source]

# WGENerator<*>:FUNCtion[:SQUare]:DCYCle
value: float = driver.wgenerator.function.square.dcycle.get(wgenerator = repcap.Wgenerator.Default)

Sets the duty cycle for the generated square waveform.

Parameters:: wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)
Returns:: square_duty_cycle: 0.01 to 99.99 at minimum frequency, actual range depends on the selected frequency

set(square_duty_cycle: float, wgenerator=Wgenerator.Default) → None[source]

# WGENerator<*>:FUNCtion[:SQUare]:DCYCle
driver.wgenerator.function.square.dcycle.set(square_duty_cycle = 1.0, wgenerator = repcap.Wgenerator.Default)

Sets the duty cycle for the generated square waveform.

Parameters:

square_duty_cycle – 0.01 to 99.99 at minimum frequency, actual range depends on the selected frequency
wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)