RunMode

SCPI Command :

WGENerator<*>:ARBGen:RUNMode

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(wgenerator=Wgenerator.Default) → RepeatMode[source]

# WGENerator<*>:ARBGen:RUNMode
value: enums.RepeatMode = driver.wgenerator.arbGen.runMode.get(wgenerator = repcap.Wgenerator.Default)

Sets the duration for which the signal of the arbitrary generator will be output after the trigger event.

Parameters:: wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)
Returns:: run_mode: SINGle | CONTinuous

set(run_mode: RepeatMode, wgenerator=Wgenerator.Default) → None[source]

# WGENerator<*>:ARBGen:RUNMode
driver.wgenerator.arbGen.runMode.set(run_mode = enums.RepeatMode.CONTinuous, wgenerator = repcap.Wgenerator.Default)

Sets the duration for which the signal of the arbitrary generator will be output after the trigger event.

Parameters:

run_mode – SINGle | CONTinuous
wgenerator – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Wgenerator’)