Scondition

SCPI Command :

TRIGger<*>:USB:SCONdition
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default) → ConditionOperator[source]
# TRIGger<*>:USB:SCONdition
value: enums.ConditionOperator = driver.trigger.usb.scondition.get(trigger = repcap.Trigger.Default)

Sets the operator to set a specific SEU or an SEU range. The SEU values are set with method RsRtx.trigger.usb.smin.set() and method RsRtx.trigger.usb.smax.set() . For SEU, see ‘SEU’.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

operator_seu: OFF | ANY | EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

  • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less than or equal, Greater than, Greater than or equal. These conditions require one SEU value to be set using TRIGgert:USB:SMIN.

  • INRange | OORange: In range, out of range. These conditions require a range of SEU values to be set using TRIGgert:USB:SMIN and TRIGgert:USB:SMAX.

set(operator_seu: ConditionOperator, trigger=Trigger.Default) → None[source]
# TRIGger<*>:USB:SCONdition
driver.trigger.usb.scondition.set(operator_seu = enums.ConditionOperator.EQUal, trigger = repcap.Trigger.Default)

Sets the operator to set a specific SEU or an SEU range. The SEU values are set with method RsRtx.trigger.usb.smin.set() and method RsRtx.trigger.usb.smax.set() . For SEU, see ‘SEU’.

Parameters:

  • operator_seu –

    OFF | ANY | EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

    • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less than or equal, Greater than, Greater than or equal. These conditions require one SEU value to be set using TRIGgert:USB:SMIN.

    • INRange | OORange: In range, out of range. These conditions require a range of SEU values to be set using TRIGgert:USB:SMIN and TRIGgert:USB:SMAX.

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)