Pcondition

SCPI Command :

TRIGger<*>:USB:PCONdition
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(trigger=Trigger.Default) → ConditionOperator[source]
# TRIGger<*>:USB:PCONdition
value: enums.ConditionOperator = driver.trigger.usb.pcondition.get(trigger = repcap.Trigger.Default)

Sets the operator to set a specific port number or a port number range. The port number values are set with method RsRtx.trigger.usb.pmin.set() and method RsRtx.trigger.usb.pmax.set() .

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

operator_port: OFF | ANY | EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

  • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less than or equal, Greater than, Greater than or equal. These conditions require one port number to be set using TRIGgert:USB:PMIN.

  • INRange | OORange: In range, out of range. These conditions require a port number range to be set using TRIGgert:USB:PMIN and TRIGgert:USB:PMAX.

set(operator_port: ConditionOperator, trigger=Trigger.Default) → None[source]
# TRIGger<*>:USB:PCONdition
driver.trigger.usb.pcondition.set(operator_port = enums.ConditionOperator.EQUal, trigger = repcap.Trigger.Default)

Sets the operator to set a specific port number or a port number range. The port number values are set with method RsRtx.trigger.usb.pmin.set() and method RsRtx.trigger.usb.pmax.set() .

Parameters:

  • operator_port –

    OFF | ANY | EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

    • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less than or equal, Greater than, Greater than or equal. These conditions require one port number to be set using TRIGgert:USB:PMIN.

    • INRange | OORange: In range, out of range. These conditions require a port number range to be set using TRIGgert:USB:PMIN and TRIGgert:USB:PMAX.

  • trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)