Condition

SCPI Command :

TRIGger<*>:DPHY:WCOunt:CONDition

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → ConditionOperator

# TRIGger<*>:DPHY:WCOunt:CONDition
value: enums.ConditionOperator = driver.trigger.dphy.wcount.condition.get(trigger = repcap.Trigger.Default)

Set the condition for the word count. You can define an exact value or a value range.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

set(hs_word_count_optor: ConditionOperator, trigger=Trigger.Default) → None

# TRIGger<*>:DPHY:WCOunt:CONDition
driver.trigger.dphy.wcount.condition.set(hs_word_count_optor = enums.ConditionOperator.EQUal, trigger = repcap.Trigger.Default)

Set the condition for the word count. You can define an exact value or a value range.

Parameters:

• hs_word_count_optor –

  EQUal | NEQual | LTHan | LETHan | GTHan | GETHan | INRange | OORange

  • EQUal | NEQual | LTHan | LETHan | GTHan | GETHan: Equal, Not equal, Less than, Less or equal than, Greater Than, Greater or equal than. These conditions require one pattern to be set with the corresponding TRIGgert:DPHY:WCOunt:MIN command.

  • INRange | OORange: In range/Out of range: set the minimum and maximum value of the range with TRIGgert:DPHY:WCOunt:MIN and TRIGgert:DPHY:WCOunt:MAX.

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)