TypePy

SCPI Command :

TRIGger<*>:DPHY:TYPE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(trigger=Trigger.Default) → BusDphyType

# TRIGger<*>:DPHY:TYPE
value: enums.BusDphyType = driver.trigger.dphy.typePy.get(trigger = repcap.Trigger.Default)

Sets the type of frame to be triggered on.

Parameters:

trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

Returns:

type_py: HS_SOP | HS_EOP | HS_PH | HS_DATA | LP_ESC | LP_TURN | LP_HSRQ

• HS_SOP: High speed start of packet

• HS_EOP: High speed end of packet

• HS_PH: High speed packet header

• HS_DATA: High speed data

• LP_ESC: Low power escape mode frame

• LP_TURN: Low power lane turnaround

• LP_HSRQ: Low power high speed request

set(type_py: BusDphyType, trigger=Trigger.Default) → None

# TRIGger<*>:DPHY:TYPE
driver.trigger.dphy.typePy.set(type_py = enums.BusDphyType.HS_DATA, trigger = repcap.Trigger.Default)

Sets the type of frame to be triggered on.

Parameters:

• type_py –

  HS_SOP | HS_EOP | HS_PH | HS_DATA | LP_ESC | LP_TURN | LP_HSRQ

  • HS_SOP: High speed start of packet

  • HS_EOP: High speed end of packet

  • HS_PH: High speed packet header

  • HS_DATA: High speed data

  • LP_ESC: Low power escape mode frame

  • LP_TURN: Low power lane turnaround

  • LP_HSRQ: Low power high speed request

• trigger – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)